Home > NEWS > INDUSTRY NEWS > News detail Return
Physical Properties Of Quartz Stone Plates Source:  New Classic Series EU Standard Quartz Stone     Newstime:  2019-08-06 08:53:57     person browsing

Here is a Quartz Stone Sheet For House Decoration Supplier talking about physical properties of quartz stone plates. If you need any information about Quartz Stone Sheet For House Decoration, feel free to contact us.

The Quartz Stone Slab names commonly sold on the market today are polymer composite materials, synthetic stones, and artificial marble. The product is a decorative artificial stone plate formed by mixing and stirring quartz sand (silica SiO2) and unsaturated resin and corresponding auxiliary agents and pigments. Let the quartz stone manufacturer share the physical properties of the quartz stone plate.

Quartz Stone Slab

Quartz Stone Slab

China's quartz stone manufacturing originated in the 1990s, but due to technical misunderstanding at the time, raw materials and additives, the products at that time were prone to breakage, water absorption and discoloration, head deformation, and high styrene volatilization. The presence. Therefore, the market has not been fully promoted, and market demand can only be imported. Until the beginning of this century, with the continuous improvement of China's quartz stone manufacturers' research and development capabilities and production technology, China's quartz stone production has been ranked among the top in the world so far (production equipment manufacturing and plate production research and development technology are all state-owned). However, for many people, it is still difficult to buy quartz stone. In fact, the reason is very simple, that is, there is not enough understanding of quartz stone! Let's take a look at the main properties of quartz stone. Wear-resisting, scratch-resistant and anti-penetration: Quartz stone is produced under high pressure and high vibration under vacuum conditions. The density of the sheet is 2.3-2.6 g/m3, and the hardness is higher than the mode hardness of 5 or more and up to the Mohs hardness of 7. The water absorption rate is 0.05% (industry standard), and the general board can reach 0.02%.

The above is the physical properties of the quartz stone plate that we share. If you want to know more about it, you can follow our website.

PREVThe Maintenance Misunderstanding Of Quartz Stone NEXTPrecautions For Glue Used In Quartz Stone Interface