Compound Quartz Stone processing can be divided into, materializing, opening, splicing and grinding. Before the quartz stone is opened, it should be carefully compared with the drawings. To avoid dry cutting, the water saw should be used for cutting, and the granular plate should pay attention to the chipping. Avoid opening right angle holes when opening holes and basin holes. Fillet holes should be used to prevent heat or severe cracking in the later stage.
Stone line manufacturers talk about the splicing glue should use the original resin glue dispensed by the manufacturer, the most important thing is to polish, the quartz stone will often lose the original Ganze in the processing, the deeper the color is more obvious, so the application of 500# The water-abrasive sheet was then polished using 1000#, 2000#, 3000# water-grinding sheets in sequence.
Quartz stone plate is made of more than 93% quartz sand and unsaturated polyester resin and other binders, which are mixed by batching, vacuum high pressure and high vibration and furnace heating.